Set a static IP to a debian server
This is useful after or before you installed YaCy on a debian server to get a unique handle to the YaCy peer in your network. We recommend to use the default address 192.168.1.70 to standardize the access to YaCy 'Appliance' Servers.
To define a static IP in your debian installation, do
- replace the line
iface eth0 inet dhcp
iface eth0 inet static address 192.168.1.70 netmask 255.255.255.0 gateway 192.168.1.1
If your router is at address
192.168.1.1 - otherwise replace
192.168.1.1 with the address of your router. If you want to use a different address than
192.168.1.70 for your YaCy peer, then replace
192.168.1.70 with your wanted address.
If you installed YaCy with the default port 9080, then your YaCy peer will be available at http://192.168.1.70:8090
Special Setting on Ubuntu
If you are running Ubuntu, then the NetworkManager will ignore these settings until you replace the line "managed=false" with "managed=true" in /etc/NetworkManager/NetworkManager.conf
Set DHCP and a static IP when running debian in VirtualBox
If you are running debian on a VirtualBox, then you can easily have two network interfaces. One of the interfaces can be configured as dhcp connection (over a virtual NAT) to ensure that you will always have a internet connection within your virtual machine while you can also have a second connection which makes it possible to reach your VM with an IP within your intranet (or from the console where you are running the VM).
- in the VirtualBox manager, open the network configuration and set Adapter 1 to NAT
- set Adapter 2 to Bridge with name: en1
- in /etc/network/interfaces, set the configuration to:
auto lo iface lo inet loopback allow-hotplug eth0 iface eth0 inet dhcp allow-hotplug eth1 iface eth1 inet static address 192.168.1.70 netmask 255.255.255.0 gateway 192.168.1.1
This will enable access to the VM at port 192.168.1.70. Please replace this IP to the value you want.